Banana Canvas boards are easy to construct. Below you'll find step-by-step guide. If you have any problems with constructing the boards, please feel free to contact us.

Each Banana Canvas consists of a flat board and two curved struts.

The board has a lip under which the struts are inserted.

As indicated by the red arrows: insert one end of a the strut underneath the lip on one side at approx. 2 inches from the top edge. Then swing & push the other end of the strut under the other lip. Take great care with the strut as excessive force can result in broken end pieces. Do not twist the strut.

You should have a strut fully inserted just below the top edge of the board. The board will be curving slightly at this point.

As indicated by the red arrows: firmly but gently push the strut to the top edge of the board. Again take care not to exert too much force on the strut.

The strut should sit snugly against the top edge. Repeat steps 3-5 with the remaining strut.

Once both struts are in place, the board will exhibit the gentle curve that Banana Canvas frames are famous for.